Main Page
The 43oh Document Library
 The MSP430F5510 USB board is a community made development kit based on the MSP430F5510 micro-controller |
 This SMD LED BoosterPack is a DIY kit for learning surface mount soldering. |
 The OLED Terminal is an OLED BoosterPack that fits your display needs. The SSD1306 OLED driver outputs a resolution of 128*64 pixels. All important OLED pins are brought out to a header in case you wish to connect the board to another micro-controller. |
 The ProtopadSMD serves as a breadboard for the Launchpad form factor. The ProtoPadSMD comes very handy if you need a base for quick prototyping SMD chips in the Launchpad form factor. This allows you to create custom BoosterPacks which are sturdy and ready for the field. |
 The VFD Clock Boosterpack is based on the vintage Russian IV-18 VFD tube. This BoosterPack is able to set an alarm and display temperature along with calendar functions. |
 This 2.2" LCD Display with Touch_Panel works with two types of displays, one with touch screen and one without. TSC2046/ADS7846 controller or MCU’s analog inputs can be used to process touch events. |
 The Protopad serves as a breadboard for the Launchpad form factor. The ProtoPad comes very handy if you need a base for quick prototyping in the Launchpad form factor. This allows you to create custom BoosterPacks which are sturdy and ready for the field. |
 The MTK3339 GPS Locator Boosterpack is the ideal GPS locator for your Launchpad. The MTK3339 Model comes with <2minute gps acquisition from a hotstart. |
 The BluePack Boosterpack allows you to talk to a bluetooth device using the Serial Port Profile. The PCB supports both the HC-05 and HC-06 versions. |
 The Card Reader is an SDCard BoosterPack for the MSP430 Launchpad. It can be used with mini and mico SDCards with an adaptor. The BoosterPack comes with breakouts for standard SDCard signals and also an LED to indicate that a card has been inserted. |
 This Color LCD board will work with the JD-T1800 1.8" Color TFT display, 160x128, ST7735R driver. |
 This is a LiPo Battery BoosterPack - The Booster. This is a perfect power source for wireless projects or for those times you need to be away from a PC. |
 The Nanopad is a miniature version(2.4cm*2cm) of the Launchpad and can accept controllers from the MSP430G series family. |
 This WireFree WiFi BoosterPack allows you to connect the Wiznet WizFi210 WiFi chip to the Launchpad. The primary interface for this chip is via serial RS232 commands.
|
|
