Main Page

From The 43oh Library
Revision as of 13:18, 12 May 2013 by Bluehash (Talk | contribs) (The 43oh Document Library)

Jump to: navigation, search

The 43oh Document Library

MSP430F5510 USB Dev Kit
Msp430F5510 development Board mainpage.jpg

The MSP430F5510 USB board is a community made development kit based on the MSP430F5510 micro-controller

SMD LED Matrix BoosterPack
Wizfi210 43oh launchpad wifi boosterpack 1.PNG

This SMD LED BoosterPack is a DIY kit for learning surface mount soldering.

43oh OLED BoosterPack
The Terminal 43oh OLED BoosterPack 4.PNG

The OLED Terminal is an OLED BoosterPack that fits your display needs. The SSD1306 OLED driver outputs a resolution of 128*64 pixels. All important OLED pins are brought out to a header in case you wish to connect the board to another micro-controller.

ProtoPadSMD BoosterPack
The SMD ProtoPad BoosterPack 2.PNG

The ProtopadSMD serves as a breadboard for the Launchpad form factor. The ProtoPadSMD comes very handy if you need a base for quick prototyping SMD chips in the Launchpad form factor. This allows you to create custom BoosterPacks which are sturdy and ready for the field.

IV-18 VFD Clock BoosterPack
IV-18 vfd boosterpack msp430 launchpad.jpg

The VFD Clock Boosterpack is based on the vintage Russian IV-18 VFD tube. This BoosterPack is able to set an alarm and display temperature along with calendar functions.

LCD+Touch BoosterPack
link=http://doc.43oh.com/BoosterPack:2.2"_LCD_Display_with_Touch_Panel

This 2.2" LCD Display with Touch_Panel works with two types of displays, one with touch screen and one without. TSC2046/ADS7846 controller or MCU’s analog inputs can be used to process touch events.

Protopad BoosterPack
Msp430 launchpad protopad PCB.jpg

The Protopad serves as a breadboard for the Launchpad form factor. The ProtoPad comes very handy if you need a base for quick prototyping in the Launchpad form factor. This allows you to create custom BoosterPacks which are sturdy and ready for the field.

GPS Locator BoosterPack
Gps boosterpack mtk3339 locator.PNG

The MTK3339 GPS Locator Boosterpack is the ideal GPS locator for your Launchpad. The MTK3339 Model comes with <2minute gps acquisition from a hotstart.

BluePack Bluetooth BoosterPack
Bluetooth bluepack hc05 hc06 populated.PNG

The BluePack Boosterpack allows you to talk to a bluetooth device using the Serial Port Profile. The PCB supports both the HC-05 and HC-06 versions.

SDCard BoosterPack
TheCardReader SDCard BoosterPack Populated 43oh.PNG

The Card Reader is an SDCard BoosterPack for the MSP430 Launchpad. It can be used with mini and mico SDCards with an adaptor. The BoosterPack comes with breakouts for standard SDCard signals and also an LED to indicate that a card has been inserted.

Color LCD BoosterPack
UniversalLCDBoosterpack lcd.PNG

This Color LCD board will work with the JD-T1800 1.8" Color TFT display, 160x128, ST7735R driver.

43oh LiPo Battery Pack USB Charger
LiPoBoosterPack msp430 launchpad 43oh standalone usb side.JPG

This is a LiPo Battery BoosterPack - The Booster. This is a perfect power source for wireless projects or for those times you need to be away from a PC.

The NanoPad
Msp430 nanopad launchpad main.jpg

The Nanopad is a miniature version(2.4cm*2cm) of the Launchpad and can accept controllers from the MSP430G series family.

Wirefree WiFi BoosterPack
Wizfi210 43oh launchpad wifi boosterpack 1.PNG

This WireFree WiFi BoosterPack allows you to connect the Wiznet WizFi210 WiFi chip to the Launchpad. The primary interface for this chip is via serial RS232 commands.


BP-5